SmallRig 2150 Overview
The lightweight 2150 Accessory Kit for Sony a7 II/a7R II/a7S II from SmallRig provides protection and accessory mounting for your Sony a7 II series mirrorless camera. This kit pairs the 1982 Cage with a quick release baseplate, 15mm LWS rod support, a quick release top handle, a removable NATO rail, and an HDMI cable clamp.
SmallRig 1982 Cage for Sony a7 II Series Cameras
The formfitting 1982 Cage for Sony a7 II Series Cameras from SmallRig features an HDMI cable clamp and several options for mounting accessories to your a7 II series mirrorless camera. For easier handling, various optional handgrips can be attached using the NATO rail on the cage's left side and the ARRI-style rosette on the right.
A cold shoe, multiple 1/4"-20 and 3/8"-16 accessory threads, and carrying strap slots are built into the cage's top and sides. The 1982 Cage maintains access to the both the camera controls and ports, and mounts onto the camera using a 1/4"-20 screw.
Compatibility
Sony a7 II, a7R II, a7S II
SmallRig Universal 15mm LWS Support Baseplate with Quick Release Plate
The Universal 15mm LWS Support Baseplate from SmallRig provides an Arca-Swiss style, non-slip quick release plate and 15mm rod-based accessory support for your mirrorless or small cine-style camera.
This baseplate system features 1/4"-20 and 3/8"-16 tripod threads and thumb-lever locks. Four vertical rods allow for an adjustable vertical range of 2.3", enabling optimal positioning of your camera accessories. The integrated 15mm rod clamps allow you to mount the baseplate on a standard 15mm LWS rod system, or you can use the mounting threads to attach a quick release plate on the bottom.
Compatibility
Including but not limited to:
- Blackmagic Design Pocket Cinema Camera
- Fujifilm X-T2
- Panasonic GH5/GH4/GH3/G85/GX85/G80/G7
- Sony a7RIII/a7II//a7/a9/a6500/a6300/a6000
SmallRig NATO Handle
The SmallRig NATO Handle is a flexible solution for holding your camera and mounting accessories. This handle secures to your rig via a separately available NATO rail. 1/4"-20 and 3/8"-16 threaded holes are placed along the length of the handle for securing articulating arms, while 15mm rod clamps are available for rigging EVFs or microphones. Additionally, two cold shoe mounts can be used for lights or wireless receivers. Using the included hex wrench, the handle can be adjusted fore and aft to achieve desired balance.
SmallRig Quick Release NATO Rail (2.75)
This 2.75" SmallRig Quick Release NATO Rail fits on your camera cage or to a cheese plate for securing NATO-compatible accessories such as handles, clamps, and articulating arms. Accessories can slide along the length of the rail, and when it's time to pack up, disengage one of the spring-loaded pins at either end of the rail and slide your accessories off. 1/4"-20 mounting screws are included, as is a hex wrench for installing the rail.
